1 8548-91 rev. e 6/17 high level digital driver mil-prf-38534 and 38535 certified facility 0006 equivalent schematic typical applications pin-out information features: ? single supply operation from 20v to 45v ? replaces nh/dh0006 ? 'and' input logic with expander ? external transition time control ? output current to 400ma ? available to dscc smd 5962-8761703 description: the MSK0006 is an integrated high voltage, high current driver designed to accept standard dtl or ttl logic levels and drive a load of up to 400 ma at 28v. and inputs are provided along with an expander connection, should additional gating be required. the addition of an external capacitor provides control of the rise and fall times of the output. the device is packaged in a hermetic 10 pin can. MSK0006 1 vcc 2 input 3 input 4 expander 5 nc 6 output 7 response time control c 8 response time control b 9 nc 10 ground ? logic level translator ? relay driver ? lamp driver
2 8548-91 rev. e 6/17 absolute maximum ratings electrical specifications v cc supply voltage (t 0.1 sec)............................................60v t st storage temperature range.......................-65c to +150c i out output current (50ms)..................................................1.5a t ld lead temperature range v in input voltage..................................................................5.5v (10 seconds)...............................................................300c i in expander input current.................................................5ma t c case operating temperature range (MSK0006h)...............................................-55c to +125c (MSK0006)....................................................-40c to +85c t j junction temperature................................................+175c parameter test conditions 1 group a subgroup MSK0006h MSK0006 units min. typ. max. min. typ. max. power supply range 2 continuous - 15 28 45 16 28 45 v logic 1 input voltage 2 20v vcc 45v 1,2,3 2.0 - 5.5 2.0 - 5.5 v logic 0 input voltage 2 20v vcc 45v 1,2,3 - - 0.8 - - 0.8 v logic 1 output voltage vcc=28v vin=2v rl=82 ? 1,2,3 26.5 27 - 26 27 - v vcc=20v vin=2v rl=82 ? 1, 2 13 19 - 13 19 - v vcc=20v vin=2.1v rl=82 ? 3 13 19 - 13 19 - v logic 0 output voltage vin=0.8v rl=100? 1,2,3 - 5 10 - 5 15 ma logic 1 input current 2 vin=2.4v 1,2,3 - 1 5 - 1 10 a vin=5.5v 1,2,3 - 25 100 - 25 150 a logic 0 input current 2 vin=0.4v 1,2,3 -1.0 - - -1.1 - - ma of supply current vin=0.8v 1,2,3 - 0.5 2.0 - 0.5 2.2 ma on supply current vin=2.0v 1,2,3 - 6 8 - 6 8.5 ma rise time vcc=28v rl=82 ? 4,5,6 - 100 300 - 100 325 ns fall time vcc=28v rl=82 ? 4,5,6 - 0.8 1.7 - 0.8 1.8 s turn on time 2 8 vcc=28v rl=82 ? 4,5,6 - 0.3 1.0 - 0.3 1.1 s turn of time 2 8 vcc=28v rl=82 ? 4,5,6 - 2.2 8.0 - 2.2 8.2 s thermal resistance 2 junction to case @ tc=125c - - 60 68 - 60 70 c/w notes: 1 vcc = 45v, cf = nc and i out = 0ma unless otherwise specifed. 2 guaranteed by design but not tested. typical parameters are representative of actual device performance but are for reference only. 3 logic input levels are verifed during logic output voltage test. 4 industrial grade devices shall be tested to subgroups 1 and 4 unless otherwise requested. 5 military grade devices ("h" sufx) shall be 100% tested to subgroups 1,2,3 and 4. 6 subgroup 5 and 6 testing available upon request. 7 subgroup 1, 4 t a = +25c 2, 5 t a = +125c 3, 6 t a = -55c 8 measured from 50% of v in to 90% of v out transition. 9 internal solder refow temperature is 180c, do not exceed. 10 reference dla smd 5962-8761703 for electrical specifcations for devices purchased as such. 9
3 8548-91 rev. e 6/17 application notes
4 8548-91 rev. e 6/17 typical performance curves
MSK0006 5 8548-91 rev. e 6/17 weight = 1 gram typical mechanical specifications ordering information MSK0006 note: see dscc smd 5962-8761703 for dla part number options. screening blank = industrial h = mil-prf-38534 class h general part number h all dimensions are specified in inches .
revision history rev status date description e released 06/17 clarify that we ofer 03 smd version and update format the information contained herein is believed to be accurate at the time of printing. msk reserves the right to make changes to its products or specifcations without notice, however , and assumes no liability for the use of its products. please visit our website for the most recent revision of this datasheet. contact msk for mil-prf-38535 class v qci status. msk www.anaren.com/msk 6 8548-91 rev. e 6/17
|
